ATF Cooler, Rectangular Version: Installing
- Tightening specification. Refer to AUTOMATIC TRANSMISSION FLUID COOLER OVERVIEW .
Install in reverse order of removal. Note the following:
Always replace O-rings.
-- Install the catalytic converter. Refer to [For engine(s) CBTA,CBUA] Removal and Installation[For engine(s) CVCA] Removal and Installation[For engine(s) CPRA,CPKA] Removal and Installation .
-- Install the coolant hoses to the ATF cooler according the markings made during the removal.
-- Check the coolant level. Refer to [For engine(s) CPRA,CPKA] General Information[For engine(s) CBTA,CBUA] General Information[For engine(s) CVCA] General Information .
-- Install the battery tray and the battery. Refer to [For engine(s) CVCA,CDVB,CPRA,CBTA,CPKA,CKRA,CBUA] Removal and Installation .
-- Check the ATF level. Refer to AUTOMATIC TRANSMISSION FLUID LEVEL, CHECKING AND ADDING .
-- Install the engine cover and the air filter. Refer to [For engine(s) CPRA,CPKA] Removal and Installation[For engine(s) CBTA,CBUA] Removal and Installation .