Automatic Transmission Fluid Level, Checking And Adding: Adding
-- Install the Adapter for Filling ATF Oil VAS6262/2 into the plug hole hand tight.
-- Connect the Adapter For Oil Filling VAS6262A to the Adapter For Filling ATF Oil VAS6262/2.
-- Shake the container before opening.
-- Attach the oil container to the Adapter For Oil Filling VAS6262A. Be sure to read the instructions. Refer to Figure.
-- Fill with 1 liter of ATF.
If the ATF Leaks Out of the Plug Hole:
The ATF does not need to be topped off.
-- Allow the ATF to drain until it drips.
-- Install and tighten the plug (with a new seal) to 27 Nm. The ATF level check is now completed.
If No ATF Leaks Out of the Plug Hole:
-- Add another liter of fluid. Refer to Adding .
WARNING:
Too little or too much ATF will impair the transmission.