Diagnostic Mode 09 - Read Vehicle Information: Procedure
-- Connect the scan tool.
-- Switch the ignition on.
-- Select Mode 09: Vehicle information.
-- Select the desired Test-ID.
-- The information requested will be displayed on the scan tool screen.
The following table is a numerical list of all Test-IDs that may be selected.
| Test-ID | Diagnostic text |
|---|---|
| 02: | Vehicle identification number e.g. |
| - |
|
| 04: | Calibration identification e.g. |
| - |
|
| - |
|
| 06: | CVN (check sum) e.g. |
| - |
|
| - |
|
| 08: | In Use Performance Tracking |
| Service $0A | Request Emission Related DTC's with Permanent Status - SUPPORTED |
-- Switch the ignition off.