Fastener Tightening Specifications: Notes
Jetta from MY 05 through 10, Jetta Sport Wagon (US)/Jetta Wagon (Canada) for MY 09, Jetta Sport Wagon (US)/Golf Wagon (Canada) from MY 10
Jetta from MY 11
| Component | Fastener Size | Nm | ||
|---|---|---|---|---|
| Backup Lamp Switch to Transmission Housing | - | 20 | ||
| Cable Mounting Bracket to Transmission Bolt/Nut | - | 20 | ||
| Flange Shaft Bolt | - | 33 | ||
| Fluid Drain/Fill Plug | ||||
| -- with a hex socket head | - | 30 | ||
| -- with a multipoint socket head | - | 45 | ||
| Gear Shift Unit to Transmission Housing Bolt (1) | - | 20 | ||
| Locking Screw to Transmission Housing | - | 45 | ||
| Slave Cylinder with Release Bearing to Clutch Housing Bolt (1) | ||||
| -- Slave cylinder with a metal housing (without locking fluid) | - | 12 | ||
| -- Slave cylinder with a plastic housing (with locking fluid) | - | 15 | ||
| Transmission Housing to Clutch Housing Bolt (1) | ||||
| -- With a internal hex, round head, "through transmission build date 6 December 2009" | M8 | 8 + 180° | ||
| -- With a internal hex round head, "from transmission build date 7 December 2009" | M9 | 15 + 180° | ||
| -- With a outer hex head | - | 15 + 90° | ||
| Transmission Shift Lever to Gear Shift Unit Nut | - | 23 | ||
| Shift Lever and Housing, through 10.06 | ||||
| Selector Bracket to Pivot Pin Bolt | - | 5 | ||
| Shift Housing to Body Nut | ||||
| M6 | 8 | |||
| M8 | 25 | |||
| Shift Lever Guide Cover to Shift Housing Bolt | - | 5 | ||
| Shift Lever and Housing, from 11.06 | ||||
| Shift Housing to Body Nut | ||||
| M6 | 8 | |||
| M8 | 25 | |||
|
||||