Service Interval Display, RECODING
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Switch on the ignition.
-- Touch: "Guided Functions" on the touch screen.
If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for Vehicle Diagnostic Tester
-- Select the following one after the other:
- Brand
- Type
- Model year
- Engine code
-- Confirm the VIN.
-- Select the following one after the other:
- "Instrument Cluster"
- "Adapt service interval extension."
-- Adapting according to "Guided Functions".
End Adaptation
-- Select Go to and then press End .
-- Turn off the ignition and disconnect the diagnostic connector.
Change in the Km-Maximum Values for Oil Change Service (fixed) during the Delivery Inspection.
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Switch on the ignition.
-- Touch: "Guided Functions" on the touch screen.
If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for Vehicle Diagnostic Tester
-- Select the following one after the other:
- Brand
- Type
- Model year
- Engine code
-- Confirm the VIN.
-- Select the following one after the other:
- "Instrument Cluster"
- "Identify control module"
- "Guided functions"
- "Oil change service (fixed)"
-- Follow the "Guided Functions" instructions.
-- "1" Reset Oil change service (fixed).
-- Follow the "Guided Functions" instructions.
The maximum Km values are displayed in the Vehicle Diagnostic Tester.
-- Select "no".
-- Select the country specific maximum values until the next oil change service.
-- Adapting according to "Guided Functions".
End Adaptation
-- Select Go to and then press End .
-- Turn off the ignition and disconnect the diagnostic connector.