TRANSMISSION [For engine(s) CJAA]: Notes
Special tools and workshop equipment required
- Engine Support Bridge 10 - 222 A
- Adapter10-222 A/18
- Engine Support Adapter10-222 A/3
- Engine Support Feet 10-222 A/8
- Transmission Support 3282
- Transmission Support Elements (Pin 3282/29) (determine when mounting the adjustment plate on the transmission support)
- Adjustment Plate 3282/33
- Transmission Support Jig 3336
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Engine/Transmission Jack V.A.G 1383 A
- Bracket T10346
- Engine Support Device 3300 A
- Adapter VW 771/40 from Slide Hammer-Complete Set VW 771
- Hose Clamps up to 25 mm dia. 3094
- Grease for Clutch Plate Splines G 000 100
- M6 x 20 Bolt
- M6 x 80 Bolt
- M10 x 20 Bolt
The engine support bridge 10-222 A and the engine support feet 10-222 A/8 will be mounted on the fender flanges later in the procedure.
- To protect the edges of the fenders, cover both engine support feet 10-222 A/8 with cloth tape -arrow-.