Tightening Specifications
| Component |
Specifications |
| Bolts on the upper transmission for the bevel box |
40 Nm + 90° (1/4) additional turn |
| Bolts on the lower transmission for the bevel box |
40 Nm + 90° (1/4) additional turn |
| Heat shield/driveshaft to bevel box |
25 Nm |
| Bevel box to transmission |
40 Nm+ 45° (1/8) additional turn |
Allocation of the Transmission Support Bolts to the Engine and Bevel Box
The illustration of the bolt head can vary from the original.
 Courtesy of VOLKSWAGEN UNITED STATES, INC.
|
| Component |
Specification |
| Bolts -1- on the upper part of the transmission |
Install hand tight, then tighten to 40 Nm |
| Bolt -2- on the upper part of the transmission |
40 Nm |
| Bolt -2- on the lower part of the transmission |
40 Nm |
| Bolt -1- on the lower part of the transmission |
Install hand tight, then tighten to 40 Nm |