Selector Shaft Seal

Special tools and workshop equipment required 

• Thrust Piece T10174

-- Remove the multifunction transmission range switch. Refer to MULTIFUNCTION TRANSMISSION RANGE SWITCH F125 .

-- Carefully pry out the selector shaft seal with a screwdriver. Be careful not to damage the selector shaft when doing this.

-- Coat the outer circumference and the sealing lip on the oil seal with Automatic Transmission Fluid (ATF).

• Installed position: The open side of the seal faces the transmission housing.

-- Install the new seal all the way using the thrust piece T10174. Do not tilt the seal.

Fig 1: Identifying New Gasket Driven In Until Stop Using Thrust Piece T10174

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the multifunction transmission range switch. Refer to MULTIFUNCTION TRANSMISSION RANGE SWITCH F125 .