MULTIFUNCTION Transmission Range Switch F125: Removing

-- Move the selector lever into the "N" position.

-- Turn off the ignition.

-- Remove the air filter housing. Refer to Removal and Installation

-- Disconnect the cable -arrows 1- and then remove it from the cable bracket -arrow 2-.

Fig 1: Identifying Cable Disengaged And Removed From Mounting Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Do not use pliers because the tabs on the cable bracket could break off.

Do not bend or kink the selector lever cable.

-- Pry the cable -1- off the lever -3- using a wrench -2-.

Fig 2: Identifying Selector Lever Cable, Lever/Selector Shaft And 10mm Open-End Wrench

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector from the multifunction transmission range switch.

-- Remove the nut -1-.

Fig 3: Identifying Selector Shaft Lever Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the spring washer -2- and the selector lever -3- from the selector shaft -4-.

-- Bend back the hooks on the lock washer -2- using a screwdriver.

Fig 4: Identifying Selector Shaft Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the lock washer if a hook breaks off.

-- Remove the nut -1-.

-- Remove the bolts -5-.

-- Remove the multifunction transmission range switch -4- and the washers -2 and 3- from the selector shaft -6-.