Overview - Final Drive

Fig 1: Identifying Final Drive Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 60 Nm +180° turn
- Replace after removing
Buffer
Washer
- Installed position: the chamfer (smaller diameter) faces the subframe
Bolts
- 60 Nm +180° turn
- Replace after removing
Rear Subframe
Stop Washers
Rear Final Drive
- Removing and Installing. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
- Bonded Rubber Bushing, Removing and Installing, refer to BONDED RUBBER BUSHING, REMOVING AND INSTALLING