LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2014 >> CC 4Motion >> Repair and Diagnosis >> Steering >> Power Steering >> 48 Steering >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

Component Fastener Size Nm
Bracket to steering column cross member bolt M8 x 30, M8 x 85 20
Cross support to bracket bolt M8 x 94 20
Cross support to steering column to cross member bolt M8 x 48 20
Handle to steering column bolt M6 x 10 3
Heat shield to steering gear bolt - 6
Steering column to bracket bolt (1) M8 x 30 20
Steering column u-joint to steering gear bolt (1) M8 x 35 20 + 90°
Steering gear to subframe bolt (1) M10 x 70 50 + 90°
Steering wheel to steering column bolt (1) - 30 + 90°
Tie rod end to wheel bearing housing nut 1, 2 M12 x 1.5 100
Tie rod end to tie rod nut - 70
Tie rod to steering gear - 100
(1) Always replace
(2) Tighten to 100 Nm, then loosen 180° (1/2) turn and tighten to 100 Nm again