Heater And A/C, Disassembling And Assembling
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
- Temperature Regulator Door Motor -V68-
- Bracket
- Bolts
- It is necessary to remove the screws in order to separate the bracket from the air distribution and evaporator housing.
- Cover
- Fresh/Recirculated Air Door Motor -V154-
- Air Intake Housing
- With air recirculation door
- Evaporator Housing Upper Section
- Evaporator Housing Lower Section
- Evaporator
- Evaporator Vent Temperature Sensor -G263-
- Connection for Glove Compartment Cooling
- Coolant Hose for Glove Compartment Cooling
- Fresh Air Blower Series Resistor with Fuse -N24-
- Fresh Air Blower -V2-
- Dust and Pollen Filter
- Cover
- For the dust and pollen filter
- Heat Exchanger
- Heater Core Trim
- Auxiliary Heater Heating Element -Z35-
- Vehicles through 10/29/2006 with Auxiliary Air Heater Control Module -J604-
- Vehicles from 10/30/2006 with Low Heat Output Relay -J359- and High Heat Output Relay -J360-
- Checking: using Vehicle Diagnostic Tester under Heating, Ventilation and Air Conditioning; OBD-Capable Systems; Auxiliary Heater; Electrical Components
- Only installed on vehicles with Diesel engine without auxiliary heater.
- Removing and installing. Refer to Auxiliary Heater Heating Element -Z35-, REMOVING AND INSTALLING
.
- Junction Box
- Air Distribution Door Motor -V428- with Air Distribution Door Motor Position Sensor -G645-