Comfort System Central Control Module -J393-

Depending on equipment, the following control modules are integrated in the Comfort System Central Control Module -J393- :

Anti-Theft Immobilizer Control Module -J362- or Access/Start Authorization Control Module -J518-

Additional information:

=> 416The Passat CC

=> 340The Passat 2006 - Electrical Equipment

Refer to appropriate System Wiring Diagram Information

Refer to Owner's Manual.

General Description:

Depending on vehicle equipment the Comfort System Central Control Module -J393- performs the following tasks in the vehicle:

Controls central locking system
Front and rear door control module activation
Actuates rear lid unlock
Actuates tank flap release
Actuates anti-theft alarm system, additional information, refer to ANTI-THEFT ALARM SYSTEM .
Actuates immobilizer, additional information, refer to IMMOBILIZER .
Actuates access/start authorization system, additional information, refer to ACCESS/START AUTHORIZATION .

NOTE:

Should the Comfort System Central Control Module -J393- require replacement, always read the coding stored in the control module by performing On Board Diagnostic (OBD) program function "Comfort System Central Control Module, replacing/coding", refer to Comfort System Central Control Module -J393-, REPLACING OR CODING .

After replacing Comfort System Central Control Module -J393-, other functions of Comfort System Central Control Module such as "Anti-Theft Immobilizer", "Anti-Theft Alarm System", "Access And Start Authorization", "Tire Pressure Monitoring" and central locking system key must also be adapted, depending on vehicle equipment.

In this case, start by adapting the anti-theft immobilizer (refer to Anti-Theft Immobilizer Control Module -J362-, ADAPTING ) and then, proceed to the other equipment-dependent functions of Comfort System Central Control Module -J393- in any order.

The following comfort system functions can be adapted after connecting the vehicle tester, selecting "Guided Fault Finding", pressing the "Go to" button, pressing the "Function/Component Selection" button and selecting the menu items "Body", "Body Repair Work", "01 - On Board Diagnostic (OBD) Capable Systems", "Comfort System" and "Functions - Comfort System Central Control Module" :

"Factory Mode", deactivating
"Single Door Opening", adapting
"Automatic locking", adapting
"Automatic Unlocking when Key Removed", adapting
"Acknowledgment for unlocking via access/start authorization", adapting
"Acknowledgement - Unlock via radio-frequency remote control", adapting
"Acknowledgement - Unlock via key switch", adapting
"Acknowledgement - Lock via Access and Start Authorization", adapting
"Acknowledgement - Lock via radio-frequency remote control", adapting
"Acknowledgement - Lock via key switch", adapting
"Acknowledgement - Anti-theft alarm system armed", adapting
"Intelligent Alarm Horn Market Version", adapting
"Tilt Sensor Sensitivity", adapting
"Interior Monitoring Sensitivity", adapting
"Battery Monitoring (Sounder)", adapting
"Comfort Operation via Remote Control", adapting
"Alarm Delay when Opening the Driver Door", adapting
"Remote Control Key", adapting
"Remote control key", checking

Diagnostic Trouble Code (DTC) Recognition and Display:

The Comfort System Central Control Module -J393- has on board diagnostic (OBD) capabilities which aids in troubleshooting.

The "Guided Fault Finding" function is to be used for troubleshooting of one of the systems described as in "Vehicle Diagnosis, Testing and Information System", refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .