Selector Lever Handle: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move the selector lever into the "D" position.
It is not necessary to pull out the button -arrow- manually. The button locks in the installed position by itself when the handle is removed.
-- Remove the cover.
-- Disconnect the connector.
-- Pull the plastic part under the handle up in the -direction of the arrow- and unlock the handle.
Handle and Clamp
-- Cut the clamp -arrow- under the boot with side cutters.
Continuation for All
-- Pull the handle up without pressing the button.
NOTE:
Do not press the button once the handle has been removed, otherwise it will not be possible to reinstall the handle again.