Towing Recognition Control Module J345, Coding
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
This test program is used to code the towing recognition control module.
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .
-- On the Vehicle Diagnostic Tester, select "Guided Fault Finding ".
-- Using the "GO TO " button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- 01 - On Board Diagnostic (OBD) capable systems
- Towing sensor
- Functions
- Coding Control Module for towing sensor