Wiper Blade

WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.

To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.

Fig 1: Identifying Front Windshield Wipers

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Refer to the Owner's manual.

Removing

NOTE:

Right and left wiper blades may not be interchanged during installation.

Joint-free wiper blades are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off the windshield.

-- Drive wiper arms into the "service-/winter position".

-- Fold up wiper arm.

-- Push button -1- and pull wiper blade mount -3- out of wiper arm -2- until it stops.

Fig 2: Identifying Method To Pull Off Wiper Blade From Wiper Arm

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Swivel wiper blade as depicted in the illustration and pull off wiper blade mount -3- in direction of arrow from wiper arm -2-.

Installing

Fig 3: Identifying Method To Pull Off Wiper Blade From Wiper Arm

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide wiper blade mount -3- up to stop into wiper arm -2-.

-- Make sure that button -1- in wiper arm -2- engages securely.

-- Carefully fold the wiper arm down onto the windshield.