Special Tools

Special tools and workshop equipment required 

• Sleeve 3160
• Bracket 30-211A
• Thrust Piece T10042
• Thrust Piece T40008
• Hot Air Blower V.A.G 1416
• Extractor Lever VW 681
• Thrust Piece T10143
• Press Tool for Shaft Seal T10180
• Driving Sleeve VW 244B
• Thrust Plate VW 401
• Thrust Plate VW 402
• Punch VW 407
• Tube 37 mm Dia. VW 416 B
• Guide Piece VW 436 A
• Guide Pin VW 439
• Holding Fixture VW 801
• Guide Piece 10-15
• Thrust Pad 3124
• Bearing Driver 3264
• Subframe Support Assem. Device 3290
• Drift T10168
• Thrust Piece T10203
• Punch VW 411
• Tube Trans. Drive Shaft VW 426
• Thrust Pad 16.5/28 mm Dia. VW 431
• Triple Square Socket Driver 3357
  Fig 1: Identifying Triple Square Socket Driver 3357

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Connecting Pin T10027 A
  Fig 2: Identifying Connecting Pin T10027 A

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Hose Clamp Pliers V.A.G 1275
  Fig 3: Identifying Hose Clamp Pliers V.A.G 1275

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Special Hook 3370
  Fig 4: Identifying Front End Hook VAS 3370

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Sleeve VW 423
  Fig 5: Identifying Sleeve VW 423

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Extractor Lever T20143/1
  Fig 6: Identifying Extractor Hook T20143

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Thrust Block T10083
  Fig 7: Identifying Pressing Support T10083

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• DriftT10169 or T10362
  Fig 8: Identifying Drift T10362

  Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Socket and Extended Bit T10107 or T10107 A
  Fig 9: Identifying Multi-Point Socket T10107 A

  Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• -1- Kukko Extractor 14.5-18.5 mm 21/2
• -1- Kukko Extractor 23.5-30 mm 21/4
• -1- Kukko Puller 12-14.5 mm 21/1
• -1- Kukko Extractor 18.5-23.5 mm 21/3
• -3- Kukko Separating Tool 5-60 mm 17/0
• -4- Kukko Support 22/2
• -4- Kukko Support 22/1
  Fig 10: Identifying Kukko Tools

  Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 11: Identifying Special Tools -- Engine Support Bridge, Bracket For Engine, Engine Support Adapter, Bracket With Spindle/Hook, Adapter & Transmission Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Engine Support Bridge 10-222 A
• Bracket for Engine 10-222 A/1
• Engine Support Adapter 10-222 A/3
• Bracket with Spindle and Hook 10-222 A/10
• Adapter10-222 A/18
• Transmission Support 3282

Fig 12: Identifying Special Tools -- Transmission, Removal/Installation

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Transmission Support Elements (Pin 3282/29) (determine when mounting the adjustment plate on the transmission support)
• Adjustment Plate 3282/33
• Transmission Support Jig 3336
• Torque Wrench (5-50 Nm) V.A.G 1331
• Torque Wrench (40-200 Nm) V.A.G 1332
• Engine/Transmission Jack V.A.G 1383 A

Fig 13: Identifying Special Tools -- Bracket, Engine Support Device, Adapter From Slide Hammer-Complete Set & Hose Clamps

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Bracket T10346
• Engine Support Device 3300 A
• Adapter VW 771/40 from Slide Hammer-Complete Set VW 771/40
• Hose Clamps up to 25 mm Dia. 3094

Fig 14: Identifying Special Tools -- Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential & Selector Rods

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and workshop equipment required 

• Holding Plate VW 309
• Holding Fixture VW 313
• Transmission Support VW 353
• Thrust Tube VW 455
• Slide Hammer-Complete Set VW 771
• Sleeve 30-21