Engine And Transmission Mount Overview

Fig 1: Exploded View Of Engine/Transmission Mount Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .
- Transmission mount bracket to transmission.
Bolt
- 50 Nm + an additional 90° (1/4) turn.
- Always replace.
- Pendulum support to transmission.
Bolt
- 50 Nm + an additional 90° (1/4) turn.
- Always replace.
- Pendulum support to transmission.
Engine Mount Bracket
Bolt
- 40 Nm + an additional 180° (1/2) turn.
- Always replace.
- Engine mount bracket to cylinder block.
Engine Mount
- Removing and installing, refer to ENGINE MOUNT .
Bolt
- 40 Nm + an additional 90° (1/4) turn.
- Always replace.
- Engine mount to body.
Support
Bolt
- 20 Nm + an additional 90° (1/4) turn.
- Always replace.
- Support to engine mount.
- Support to body.
Bolt
- 60 Nm + an additional 90° (1/4) turn.
- Always replace.
- Engine mount to engine mount bracket.
Bolt
- 40 Nm + an additional 90° (1/4) turn.
- Always replace.
- Engine mount to body.
Pendulum Support
- First, secure the pendulum support to the transmission and then to the subframe.
Bolt
- 100 Nm + an additional 90° (1/4) turn.
- Always replace.
- Pendulum support to subframe.
Bolt
- 40 Nm + an additional 90° (1/4) turn.
- Always replace.
- Transmission mount to body.
Transmission Mount
Bolt
Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .
- Transmission mount bracket to transmission.
Transmission Mount Bracket
Bolt
- 60 Nm + an additional 90° (1/4) turn.
- Always replace.
- Transmission mount to transmission mount bracket.