Special Tools

Special tools and workshop equipment required 

• Adapter VW 771/40
• Threaded Adapter from Kukko Support 22/1
• Driving Sleeve VW 244 B
• Thrust Plate VW 401
• Thrust Plate VW 402
• Punch VW 407
• Tube 37 mm Dia.VW 416 B
• Guide Piece VW 436 A
• Guide Pin VW 439
• Holding Fixture VW 801
• Guide Piece 10-15
• Thrust Pad 3124
• Bearing Driver 3264
• Subframe Support Assm. Device 3290
• Drift T10168
• Thrust Piece T10203
• Punch VW 407
• Drift T10168
• Triple Square Socket Driver 3357
  Fig 1: 3357 Triple Square Socket Driver

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Connecting Pin T10027 A
  Fig 2: Identifying Connecting Pin T10027 A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Hose Clamp Pliers V.A.G 1275
  Fig 3: Hose Clamp Pliers V.A.G 1275

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench (5-50 Nm) V.A.G 1331
  Fig 4: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Sleeve VW 423
  Fig 5: Identifying Sleeve VW 423

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Hose Clamps up to 25 mm Dia. 3094
  Fig 6: 3094 Hose Clamps

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pin 3282/29
  Fig 7: Identifying Pin 3282/29

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Adjustment Plate 3282/33
  Fig 8: Identifying Adjusting Plate 3282/33

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Transmission Support Jig 3336
  Fig 9: Identifying Transmission Support Jig. 3336

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane - Load Cap = 700-1200 KGVAS 6100
  Fig 10: Identifying Shop Crane VAS 6100

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Thrust Block T10083
  Fig 11: Identifying Pressing Support T10083

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Drip Tray for VAS 6100 VAS 6208
  Fig 12: Drip Tray For Shop Crane VAS 6208

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pulling Hook T20143
  Fig 13: Extractor Hook T20143

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Trim Removal Wedge 3409
  Fig 14: 3409 Wedge

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 15: Identifying Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Engine Support bridge 10-222 A
• Transmission Support 3282
• Engine-/Gearbox Jack V.A.G 1383 A
• Tensioning Strap T10038
• Engine Support Basic Set T40091
• Engine Support Supplement Set T40093

Fig 16: Identifying Special Tools -- Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential And Selector Rods

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Holding Plate VW 309
• Holding Fixture VW 313
• Transmission Support VW 353
• Thrust Tube VW 455 or Sleeve 3160
• Slide Hammer-Complete Set VW 771
• -1- Kukko Puller 12-14.5 mm 21/1
• -1- Kukko Extractor 14.5-18.5 mm 21/2
• -1- Kukko Extractor 23.5-30 mm 21/4
• -3- Kukko Separating Tool 5-60 mm 17/0
• -4- Kukko Support 22/1
• -4- Kukko Support 22/2

Fig 17: Identifying Special Tools -- Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Bracket 30-211 A
• Thrust Piece T10143 or Press Tool for Shaft Seal T10180
• Drift T10169 or T10362
• Thrust Piece T40008
• Torque Wrench (5-50 Nm) V.A.G 1331
• Inductive Heat Unit V.A.G 1416