Clock And Date, Setting

Clock with Buttons Inside the Instrument Cluster

The clock can be set, only when the clock time is being displayed in the instrument cluster.

Use the buttons -1- and -2- inside the instrument cluster to set the clock.

-- Press the button -1- to select the hour setting inside the instrument cluster.

-- Press the button -3- quickly to advance the hours. Hold button down to quickly scroll through the hours.

-- Press the button -1- again to select the minutes display.

-- Press the button -3- quickly to advance the minutes.

-- Hold button down to quickly scroll through the minutes.

-- Press the button -1- again to end the process.

Set Hour and Date with Buttons on Windshield Wiper Lever

-- Switch on the ignition.

-- Press button -2- for two seconds to go to main menu.

-- Use the button -2- to select the "settings" menu. Confirm with the button -1-.

-- Call up the menu "Clock" with the button -2- and confirm with the button -1-.

-- Mark menu time "Hours" by pressing button -1-

-- Set correct hour with button -2-. Confirm with the button -1-.

-- Do the same with menu item "Minutes".

-- Leave the "Settings" menu by using menu item "back".

-- Select "MFI" (multifunction indicator) and press the button -1- to confirm.

-- Turn off ignition.

Set Hour and Date with Buttons on Multi-Function Steering Wheel

-- Switch on the ignition.

-- Press button -5- until "Settings" menu appears.

-- Then select menu item "Clock" with buttons -2- and -4-.

-- Press the button -5- to confirm.

-- Confirm the "hour" with the button -5- and use the buttons -2- and -4- to set the correct hour.

-- Confirm with button -5- and change to minute setting which is done the same as when setting the hour.

-- Leave the menu again with button -1-.

-- Turn off ignition.