Clean Working Conditions
- Always clean the connection points and the area around them first, and then loosen them.
- Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set VAS 6122.
- Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Use a lint-free cloth.
- Always make sure that no dirt enters an open transmission.
- Only install clean components. Install replacement parts immediately after removing them from their packaging.
- Cover all opened components carefully if it necessary to perform a repair.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.