Test Step 6 - Check the Logic Ground Circuit for an Open

Fig 1: Check the Logic Ground Circuit for an Open Or High Resistance

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance of the logic ground wire between the power liftgate module C2 harness connector and the power liftgate latch harness connector.

Is the resistance less than 2.0 ohms?

Yes

• Go to Test Step 7 Test Step 7 - Check the Liftgate Ajar Switch Sense Check For Open 

No

• Repair the logic ground circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .