Pendulum Support: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Threaded inserts (for example, "Heli Coil") are located in the fastening holes for the pendulum support.

Fig 1: Identifying First Thread

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Characteristics: Section on first thread -arrow-.

Fig 2: Identifying Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Replace the bolts that were tightened with an additional turn after removing them.

-- Tighten the bolts in steps in the sequence shown: