Fastener Tightening Specifications: Notes

Component

Fastener Size

Bolts and Nuts

4.5

M10

M12⁽¹⁾

⁽¹⁾	Tightening specification for a M12 collar bolt: 75 Nm

Fig 1: Engine Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Support the engine in its installed position when installing and removing.

A ¹⁾ = 40 Nm + an additional 90° (1/4) turn

B ¹⁾ = 60 Nm + an additional 90° (1/4) turn

C ¹⁾ = 20 Nm + an additional 90° (1/4) turn

¹⁾ Always replace.

Fig 2: Identifying Transmission Assembly Mount & Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 ¹ = 40 Nm + an additional 90° (1/4) turn

2 ¹ = 60 Nm + an additional 90° (1/4) turn

¹⁾ Always replace.

Fig 3: Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A ¹ = 50 Nm + an additional 90° (1/4) turn

B ¹ = 50 Nm + an additional 90° (1/4) turn

C ¹ = 100 Nm + an additional 90° (1/4) turn

¹⁾ Always replace.