Selector Lever Cable, Adjusting: Notes

Special tools and workshop equipment required 

• Torque Wrench (5-50 Nm) VAG1331

• The selector mechanism and selector lever cable must move easily when shifting.
• The selector lever cable boot must be undamaged.

Selector Lever Cable Must Always be Adjusted If:

• The selector lever cable was removed from the transmission.
• The engine and/or transmission were removed and installed.
• The engine/transmission mounts were removed and installed.
• The selector lever cable and the selector mechanism were removed and installed.
• Engine/transmission position changes, for example, were installed free of tension.