Transmission Fluid Level, Checking

Special tools and workshop equipment required 

• For oil filler plug with multi-point fitting Triple Square Socket Driver 3357.
• Torque Wrench 1331 5-50Nm VAG1331

Transmission fluid.

-- Remove the noise insulation. Refer to Noise Insulation .

-- Remove the plug for checking the transmission fluid level -arrow-.

Fig 1: Identifying Oil Filler Locking Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The Level is Correct when the Transmission Fluid Comes Up to the Bottom Edge of Oil Filler Hole.

-- Add transmission fluid, if necessary, until it reaches the lower edge of the filler hole.

-- If present with new seal, install bolt -arrow-.

-- Tighten the bolt -arrow-. Refer to Fig 2.

Fig 2: Different Versions Of Oil Drain Plugs

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

I - Oil filler or drain plug with multi-point socket head, 45 Nm

II - Oil filler or drain plug with hex socket head, 35 Nm

-- Install the noise insulation. Refer to Noise Insulation .