Windshield Wiper System: Notes
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
DTC recognition and display, refer to DTC RECOGNITION AND DISPLAY .
CAUTION:
When disconnecting and connecting the battery, always perform the work procedure as described in the repair information and refer to BATTERY, DISCONNECTING AND CONNECTING .
NOTE:
Additional information:
Refer to the Owners Manual.
The Wiper Motor Control Module -J400- and the Windshield Wiper Motor -V- are combined into one assembly.
To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by pressing the windshield wiper lever in the "one-touch wiping" position within 10 seconds after switching the ignition off. Refer to the Owner's Manual.