Rearview Camera: Notes
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench V.A.G 1783
The rear view camera and pivoting motor are installed in individual housings in the rear lid pivoting emblem. To remove the camera housing, both components and the pivoting emblem must be removed from the rear lid first. Then the camera housing, the pivoting motor and pivoting emblem can be removed and the camera housing can be separated from the pivoting motor. The camera is not designed to be removed from the camera housing.
- Rearview camera, removing and installing, refer to REARVIEW CAMERA .
- Rear view camera housing with pivoting motor in pivoting emblem, removing and installing, refer to REARVIEW CAMERA .
- Rear View Camera, Disconnecting from Pivoting Motor REARVIEW CAMERA .