Rear Window Overview
- Rear Window
- Rear Lid
- Sealing Lip
- PUR Adhesive Sealant
- Bead diameter: width = 6.5 mm, height = 10 mm (including pre-coating, residual material on window glass and window flange)
- Minimum curing time, refer to MINIMUM CURING TIME FOR BONDED WINDOWS
- Body Flange
- Gap Dimension
- Set a constant dimension at the top and sides of 2.5 mm using the Gauge - Gap Adjustment3371
- Contact for Window Heater
- Adhesive Tape
- Duct tape to hold the rear window in the installation position until the adhesive hardens
- Distance Dimension
The adhesive tape is applied at a distance of 150 mm from the roof edge