Automatic Headlamp Control And Static Cornering Lamp, Checking Function
Automatic Headlamp Control
- Vehicle must be in daylight.
-- Switch on the ignition.
-- Turn the headlamp switch -4- to the automatic headlamp control position -2-.
The headlamp should not come on when it is bright.
Rain/Light Recognition Sensor is located in upper center area of front windshield -arrow-.
-- Cover the font windshield from the exterior in the interior rearview mirror area -arrow- with your hand or some suitable object.
The decrease in light is measured and the headlamps are switched on.
-- Turn the headlamp switch -4- to -1- and turn off the ignition.
Static Cornering Lamp
The static cornering lamp is integrated in the fog lamp.
-- Start engine.
-- Turn on the low beam.
-- Turn on the left turn signal, turn the steering wheel all the way to the left if necessary
-- Check the cornering lamp.
-- Repeat on the other side.