LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2013 >> Beetle TDI, 2D Hatchback, Automatic DCT Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Procedures (Hatchback) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Transport Protection, Remove Locking Pieces From Front Axle Struts
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transport Protection, Remove Locking Pieces From Front Axle Struts

In vehicles with sport suspension, locking pieces are installed in springs of front axle. These models can be identified by a tag attached at the mirror -arrow-.

Fig 1: Locating Identification Tag Attached At Mirror
GWWA02-0036Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Locking pieces should prevent vehicle from bouncing when being driven on to an automobile transport or railroad car and thereby become damaged.
WARNING: Locking pieces must always be removed before delivering the vehicle! There is a "Warning!" hang tag hanging from the rearview mirror as a reminder.

Perform the following procedure:

NOTE:

It is not necessary to remove the wheels.

Be careful not to damage surface of coil springs.

-- Relieve load on coil spring by raising vehicle on lifting platform.

-- Press locking piece -arrow- from coil spring.

Fig 2: Locating Coil Spring Locking Piece
GWWN01-10735Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.