LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2013 >> Beetle TDI, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 79 (Wiper/Washer Systems (Hatchback)) >> 92 Wiper/Washer Systems >> General Information >> Windshield Wiper Arms, Adjusting >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Wiper Arms, Adjusting: Procedure

WARNING: This page is about a different variant/trim than selected.

-- Deactivate the Alternating Park Position (APP) function, refer to WIPER MOTOR ALTERNATING PARK POSITION FUNCTION, DEACTIVATING .

-- Let the wiper return to its park position and then turn off the ignition.

-- Adjust the windshield wiper arms at this time.

Driver Side 

Fig 1: Checking Windshield Wiper Arms Adjustment
GWWM92-10008Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Distance -a- between tips of wiper lips and upper edge of plenum chamber cover must be 10 mm.

-- If necessary, adjust the windshield wiper blade park position by repositioning the windshield wiper arm.

-- Tighten the threaded connections to the tightening specification.

Passenger Side 

Fig 2: Checking Windshield Wiper Arms Adjustment
GWWM92-10008Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Distance -b- between tips of wiper lips and upper edge of plenum chamber cover must be 10 mm.

-- If necessary, adjust the windshield wiper blade park position by repositioning the windshield wiper arm.

-- Tighten the threaded connections to the tightening specification.