Control Module For Emergency Call Module And Communication Unit -J949-, Replacing

Control Module for Emergency Call Module and Communication Unit -J949-, Replacing and Adapting

• Current data for the "Guided Fault Finding"

-- Select the Replace Control Module  function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Remove the Control Module for Emergency Call Module and Communication Unit -J949-. Refer to CONTROL MODULE FOR EMERGENCY CALL MODULE AND COMMUNICATION UNIT -J949-, REMOVING AND INSTALLING .

-- Install the new Control Module for Emergency Call Module and Communication Unit -J949-. Refer to CONTROL MODULE FOR EMERGENCY CALL MODULE AND COMMUNICATION UNIT -J949-, REMOVING AND INSTALLING .

-- Select the Coding  function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Adapting to Immobilizer  function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Activating  function on the Vehicle Diagnostic Tester -- in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- In the Guided Fault Finding  or Guided Functions  select the function "ERA-Glonass, Operating" using the Vehicle Diagnostic Tester --.

-- Switch off the ignition.