General Repair Information: Transmission: Notes

WARNING: This page is about a different variant/trim than selected.

Do not run the engine and do not tow the vehicle if the transmission pan is removed or if there is no transmission fluid inside the transmission.
Always clean the connection points and the areas around them first, and then loosen them.
When installing the transmission, make sure the alignment sleeves are correctly installed between the engine and transmission.
Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil, paper or a lint free cloth.
Only install clean components: Remove the replacement parts from their packaging just prior to installing them.
Carefully cover or seal unpacked components, if repairs cannot be performed immediately.
With the transmission removed, secure the torque converter so that it cannot fall out.