Steering Column Switch, Without KESSY, Overview

Steering Column Switch, Without KESSY, Overview

• There are different versions of the steering column electronic systems control module (J527) , the steering column combination switch (E595) and the steering column switch mount depending on the manufacturer (Valeo or Kostal). The Valeo version is shown in the illustration.






1 - Steering Column Electronic Systems Control Module (J527)

• Mounting bolt tightening specification: 1.5 Nm

• Pay attention to the removing/installing sequence.

• Coding, refer to => [ Steering Column Electronic Systems Control Module (J527), Without KESSY, Coding ] Steering Column Electronic Systems Control Module (J527), Without KESSY, Coding.

2 - Steering Column Combination Switch (E595)

• Pay attention to the removing/installing sequence.

3 - Steering Column Switch Mount

4 - Shear Bolts

• M8 x 20

• Break-off torque: approximately 15 Nm

5 - Steering Lock Housing

The steering lock housing must be remove and installed together with the steering column switch mount.

6 - Ignition Switch and Lock Cylinder

• Removing and installing, refer to => [ Ignition Switch and Lock Cylinder Components ] Service and Repair.