Wheel Alignment Measure Preparations

Wheel Alignment Measure Preparations

Special tools, testers and auxiliary items required

• Brake pedal actuator (V.A.G 1869/2)

The lateral run-out of the wheel must be compensated for. Otherwise, measurement will result in false readings.

A correct toe-in adjustment will not be possible without performing lateral run-out compensation!

For this, observe notes by manufacturer of wheel alignment equipment.

- Perform wheel run-out compensation.

- Insert brake pedal actuator (V.A.G 1869/2).

- Actuate the brake pedal using brake pedal loading device.