Shift Cable Adjustment And Verification: Verification

-- Place the shift lever in the park position.

-- Attempt to move the vehicle by rocking it back and forth on level ground. If the vehicle does not move, attempt to start the engine. If the engine starts, the park position is correct.

-- Set the parking brake.

-- Turn the key to ON/RUN and press the brake pedal. Place the shift lever in the neutral position.

-- Attempt to start the engine. If the engine starts in both the neutral or the park positions, the shift cable is adjusted properly. No adjustment is required.

-- If the engine does not start in either the park or the neutral positions, perform the adjustment procedure.