Left Engine Mount/Bracket: Installing

-- Install the left transmission mount onto the vehicle. Tighten bolts (1 and 3) to 50 Nm (37 ft. lbs.).

Fig 1: Identifying Left Transmission Mount Isolator With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lower the vehicle.

-- Install the PCM. Refer to POWERTRAIN CONTROL MODULE .

-- Install the two transmission mount to transmission bolts (1). Tighten bolts (1) to 100 Nm (74 ft. lbs.).

Fig 2: Identifying Transmission Mount To Transmission Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the floor jack.

-- Install the front fore and aft crossmember. Refer to Removal and Installation .

-- Lower the vehicle.

-- Install the air cleaner body housing. Refer to AIR CLEANER HOUSING .

-- Connect the negative battery cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .