Front Engine Mount Bracket: Installing

WARNING: This page is about a different car, the 2010 Volkswagen Routan and 2009 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount Bracket And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the engine mount bracket (2) to the engine block.

-- Install the engine mount bracket bolts (1) until snug. Do not tighten at this time.

Fig 2: Identifying Hose Bracket Bolt, Engine Mount Bracket And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine mount bracket bolts (1) to the engine mount bracket (2).

-- Tighten the engine mount bracket bolts (1) to 100 Nm (74 ft lbs).

-- Position the hose bracket to the engine mount and install the bolt (3).

Fig 3: Identifying Engine Mount Bracket And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the engine mount bracket bolts (1) to 100 Nm (74 ft lbs).

Fig 4: Identifying Engine Mount Through Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine mount through bolt (4). Tighten the bolt to 54 Nm (40 ft lbs).

-- Remove the adjustable jack from under the engine, if necessary.

-- Lower the vehicle.