Section 11 (Engine Controls - Introduction (Except Diesel & Hybrid)): Preface: Notes
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
This article provides a step-by-step approach for diagnosing driveability, emission, and powertrain control system symptoms. Before beginning diagnosis, it may be helpful to reference any Technical Service Bulletins (TSBs) information when this is available.
NOTE:
For the 6.0L Diesel, refer to INTRODUCTION - 6.0L DIESEL
.
For the Escape Hybrid, refer to INTRODUCTION - ESCAPE HYBRID
.
This article is used in conjunction with service information articles and SYSTEM WIRING DIAGRAMS . The service information articles are used to provide additional diagnostic or component removal and installation information. Refer to the SYSTEM WIRING DIAGRAMS for vehicle specific wiring information and component, connector, and splice locations.
The following is a description of the information contained in each of the ENGINE PERFORMANCE articles.