Section 2 - Additional PCM/TCM Replacement Procedures

NOTE:

To continue, first determine the type of PCM/TCM in the vehicle, read and write down the required steps, and then proceed to the STEP-BY-STEP INSTRUCTIONS for additional information on completing the procedures.

-- PCM Replaced (if equipped with WCM)

-- Learn ETC (if equipped with ETC)

-- Check PCM VIN (if NOT equipped with WCM)

-- Check PCM Odometer

-- Quicklearn (if equipped with EATX)

Step-By-Step Instructions

Check PCM Odometer

-- From the "Home" screen, select "ECU View".

Select "PCM"
Select "Misc. Functions"
Select "Check PCM Odometer" and follow the on screen instructions.
When complete, select "Finish".

Check PCM VIN

-- From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Check PCM VIN" and follow the on screen instructions
When complete, select "Finish"

Learn ETC

-- From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Learn ETC" and follow the on screen instructions.
When complete, select "Finish"

PCM Replaced

-- The vehicle PIN (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:

The original selling invoice
DealerCONNECT > Parts > Key Codes
Contacting the District Manager.

-- From the "Home" screen, select "ECU View"

Select "WCM"
Select "Misc. Functions"
Select "PCM Replaced" and follow the on screen instructions.
When complete, select "Finish"

Quicklearn

-- From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Quicklearn" and follow the on screen instructions.
When complete, select "Finish"