Right Engine Mount/Bracket: Installing

-- If removed, install the right engine mount bracket (1) and tighten bolts (2 and 3) to:

Fig 1: Right Engine Mount Bracket With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Tighten M10 bolts (2) to 55 Nm (41 ft. lbs.)
• Tighten M8 bolt (3) to 25 Nm (18 ft. lbs.).

-- Install the right engine mount isolator (4). Tighten bolts (6) to 50 Nm (37 ft. lbs.).

Fig 2: Identifying Ground Strap, Upper Engine Mount Bracket, Bolts, Nuts And Right Engine Mount Insulator

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the upper engine mount bracket (2) and tighten bolts:

• Tighten bolts (1) to 55 Nm (41 ft. lbs.).
• Tighten nuts (5) to 20 Nm (15 ft. lbs.).

-- Install the ground strap (3) to the upper engine mount bracket (2).

-- Remove the floor jack.

-- Raise and support the vehicle.

-- Install the belly pan.

-- Lower the vehicle.