Test Step 4 - Right Pinch Sensor Signal Circuit Open

Fig 1: Testing Right Pinch Sensor Signal Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Turn the ignition ON.
• Measure the voltage between the logic ground circuit and the right pinch sensor signal circuit in the right pinch sensor harness connector.

Is the voltage less than 4.5 volts?

Yes

• Go to Test Step 5 Test Step 5 - Check the Right Pinch Sensor Signal Circuit for an Open 

No

• Go to Test Step 6 Test Step 6 - Right Pinch Sensor Signal Circuit Short to Voltage