Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
- Disconnect the PCM electrical connectors.
- Remove the bolts and the PCM.
- If necessary, remove the bolts and the PCM bracket.
NOTE:
Any powertrain control module (PCM) replacement will require that ALL customer keys are available to be reprogrammed at the time of installation. PCM replacement DOES NOT require new keys.