Compass Zone Adjustment
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the ON position.
- Start the engine.
- Press the message center switch INFO button repeatedly until the compass and the odometer are displayed in the message center.
- Determine which magnetic zone you are in for your geographic location.
- Press and hold the RESET button until RESET FOR ZONE is displayed in the message center.
- Release the RESET button and slowly press the RESET button down again.
- Press the SETUP button repeatedly until the correct zone setting for your geographic location is displayed.
- Press and release the RESET button to exit the zone setting mode and lock your individual zone.
NOTE:
The top of the message center must be blank. Do not select Trip, DTE, or AFE.