LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Routan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (MULTIFUNCTION Electronic Modules System) >> Removal And Installation >> Smart Junction Box (SJB) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Smart Junction Box (SJB): Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The steps included in the SJB removal and installation procedure are critical to restoring the SJB and tire pressure monitoring systems to normal operation. A new SJB is delivered in manufacturing mode with 6 preset diagnostic trouble codes (DTCs) related to the tire pressure monitoring system (TPMS). The presence of these DTCs requires the installation procedures be followed in order to clear the DTCs and enable normal SJB operations.
    NOTE: Prior to removal of the SJB, it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed. For additional information, refer to MODULE CONFIGURATION .
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the floor console SJB cover.
  3. Remove the transmission selector lever bezel from the floor console finish panel.
  4. Apply the parking brake.
  5. Remove the parking brake lever boot from the floor console finish panel.
  6. Remove the floor console finish panel.
  7. Remove the SJB screw.
  8. Disconnect the electrical connectors and remove the SJB.
scientia non olet · About LEMON Manuals