Front Engine Mount: Installing

WARNING: This page is about a different car, the 2010 Volkswagen Routan and 2009 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crossmember, Engine Mount Bolts And Front Engine Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the front engine mount (1) onto the crossmember (3).

-- Install the engine mount bolts (2). Tighten the bolts to 50 Nm (37 ft lbs).

Fig 2: Identifying Engine Mount Through Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine mount through bolt (4). Tighten bolt to 54 Nm (40 ft lbs).

-- Remove the adjustable jack from under the engine, if necessary.

-- Lower the vehicle.