Ignition Coil: Installing

WARNING: This page is about a different car, the 2010 Volkswagen Routan and 2009 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wiring Harness Electrical Connector, Ignition Coil And Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the ignition coil (3) and bolt (2). Tighten the bolt to 8 Nm (71 in lbs).

-- Connect the wiring harness electrical connector (1) to the ignition coil (3).

-- Install the upper intake manifold. Refer to UPPER INTAKE MANIFOLD .

-- Connect the negative battery cable. Refer to BATTERY .