Ignition Coil: Installing
WARNING: This page is about a different car, the 2010 Volkswagen Routan and 2009 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the ignition coil over the studs on the bracket.
-- Install the 2 nuts to the ignition coil studs and tighten the nuts. Tighten the nuts to 12 Nm (106 in lbs).
-- Connect the wiring harness electrical connector to the ignition coil.
-- Position and install the spark plug wires to the ignition coil.
-- Reposition the power steering reservoir. Slide bracket over the mounting stud.
-- Install the 2 bolts to the power steering reservoir to intake manifold.
-- Tighten the lower nut to the stud on the ignition coil bracket.
-- Connect the negative battery cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .