Throttle Position (TP) Sensor: Removal
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the throttle position (TP) sensor electrical connector.
- Remove and discard the 2 screws and the TP sensor.
CAUTION:
Failure to remove the throttle position (TP) sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high-speed driver to complete the removal.